TL;DR
Get business pricing on garage and car supplies
- Business-only prices and quantity discounts
- Tax-exempt purchasing
- Multiple users, one account, clear invoices
American Battery Solutions has introduced Aventor, an 800-volt battery platform aimed at commercial, industrial and specialty vehicle applications. The company lists 113 kWh of capacity and 358 kW peak discharge power; customer samples are planned for 2027, with production targeted for the first quarter of 2028.
American Battery Solutions has introduced Aventor, an 800-volt battery platform designed for high-utilization commercial, industrial and specialty applications. The Komatsu-owned battery maker says the system stores 113 kWh and delivers up to 358 kW of peak discharge power; customer samples are planned for 2027, ahead of production targeted for the first quarter of 2028.
ABS says Aventor is assembled in the United States using domestically sourced cells and is intended to support original-equipment manufacturer programs that need to comply with Build America, Buy America requirements. The company has not identified customers or specific vehicle programs in the announcement. Its stated initial production capacity is 6,000 packs per year, equivalent to approximately 0.7 gigawatt-hours.
The platform uses a common architecture for two pack formats. The Chassis-Integrated Pack measures 2,090 by 634 by 285 millimeters and can be fitted between frame rails or in other constrained horizontal locations, including a roof. The Hyper-Rugged Cube Pack is designed for harsher conditions, including high vibration and shock, and can be installed in multiple orientations.
ABS reports an energy density of 300 Wh/L and specific energy of up to 200 Wh/kg. The company says the wire-free battery management system measures voltage and temperature at each series element, with a microprocessor and data storage at each cell group. Listed features also include active isolation monitoring, vent-gas detection, cybersecurity protections, over-the-air updates and anti-propagation technology. ABS says Aventor is designed for up to 10 years of heavy-duty service and that its standard enclosure carries IP67 immersion and IP69K high-pressure washdown ratings.
A Platform for High-Use Equipment
For commercial and industrial operators, battery performance affects more than vehicle range: charging time can take equipment out of service and reduce productive hours. ABS says Aventor can charge from 10% to 80% in 42 minutes or less, a claimed figure that could be relevant for fleets with short charging windows. The announcement does not specify the charging conditions, charger rating or temperature range behind that estimate.
The two pack formats give OEMs options for different installation constraints and operating environments, while the domestic sourcing and assembly claims may matter to programs subject to BABA requirements. Those attributes could broaden the platform’s suitability, but the announcement does not confirm a contract, deployment or completed qualification with any OEM.
The planned 2028 start also places the product’s commercial availability in the future. The stated capacity indicates ABS’s intended initial scale, not output already achieved. Buyers will need to evaluate the system’s performance and durability in their own applications and verify the relevant certification status before deployment.
heavy-duty electric vehicle battery pack
As an affiliate, we earn on qualifying purchases.
As an affiliate, we earn on qualifying purchases.
Two Pack Formats, One Architecture
ABS is a battery maker owned by Komatsu. The company’s announcement presents Aventor as a platform for high-utilization equipment, rather than a battery tied to one named vehicle or machine. Its 800 V architecture and shared design are intended to serve multiple OEM applications through the two enclosure formats.
The company lists alignment with functional-safety, regulatory and certification requirements including ASIL-C under ISO 26262, FMVSS 305a, UL 2580 and ECE R100. The wording describes intended alignment; it does not establish that every Aventor configuration has received each certification. ABS also says the battery is built and validated for a design life of up to 10 years, but has not provided test results or operating conditions in the source announcement.
According to the report published by Charged EVs on October 18, 2026, the platform’s next stated development milestone is customer sampling in 2027. The company’s production target follows in the first quarter of 2028.
“We set out to develop a battery platform that leads on energy density without any compromises in the safety, durability or performance these applications demand.”
— Subhash Dhar, ABS founder and CEO
As an affiliate, we earn on qualifying purchases.
OEM Deals and Test Conditions
ABS has not named customers, disclosed orders or identified the equipment models expected to use Aventor. The announcement also does not clarify whether the listed safety and regulatory standards have been independently certified for the platform, or which specific pack configurations are covered.
Several performance claims need further detail. The source does not provide the charging power or conditions behind the 42-minute charge estimate, nor test procedures for the energy-density figures, 10-year design life or ruggedness claims. It is also not clear how the stated 6,000-pack annual capacity will be reached or whether the planned schedule depends on customer validation and other milestones.
industrial battery management system
As an affiliate, we earn on qualifying purchases.
As an affiliate, we earn on qualifying purchases.
Customer Samples in 2027
ABS plans to provide customer samples in 2027 and begin production in the first quarter of 2028. Those steps should provide more information about OEM interest, pack configuration options and validation progress. The company has not given more specific sample dates or named a first production customer.
Further details to watch for include confirmed certification status, independent performance data and the operating conditions used for the charging and service-life claims. Until those are disclosed, Aventor’s announced specifications and launch schedule remain company-provided information rather than evidence of production deployment.
high capacity EV battery for commercial trucks
As an affiliate, we earn on qualifying purchases.
As an affiliate, we earn on qualifying purchases.
Key Questions
What is the Aventor battery platform?
Aventor is an 800 V battery platform from American Battery Solutions for high-utilization commercial, industrial and specialty applications. ABS lists 113 kWh of storage capacity and 358 kW of peak discharge power.
When will Aventor be available?
ABS plans to provide customer samples in 2027 and start production in the first quarter of 2028. The company has not announced a more specific schedule or named launch customers.
What are the two Aventor pack formats?
The platform offers a Chassis-Integrated Pack for horizontal installation in locations such as between frame rails, and a Hyper-Rugged Cube Pack designed for harsher mechanical environments and multiple installation orientations.
How quickly does Aventor charge?
ABS says the battery can charge from 10% to 80% in 42 minutes or less. The announcement does not state the charger power or test conditions used to produce that estimate.
Has Aventor been certified to the standards listed by ABS?
ABS says the platform is designed to align with requirements including ASIL-C under ISO 26262, FMVSS 305a, UL 2580 and ECE R100. The announcement does not confirm that every configuration has received those certifications.
Source: rss
Fall Picks
fall essentials
As an affiliate, we earn on qualifying purchases.
